How to send a map from AnyFleet to the iw.hub ?
- Browse to AnyFleet home-page
- Under 'Active Maps' click on the map you have just created (you want to send to the iw.hub)
- Click on 'Devices' in the upper menu bar
- Select the iw.hub
- Enable/Activate the 'Maintenance Mode' by clicking on 'on/off' button
- Confirm the maintenance mode activation
- Click on 'Update Map Settings'
- Confirm your updating map
- Wait for a couple of minutes then restart the robot with power switch (blue push button)
- Edit the map by creating zones and PoIs
Note: The device will need zone update after map update. Therefore please refer to the knowledge article 'How to do a zone update ?' or follow the steps below:
- Click on 'Update Zones' and Confirm your choice.
Note: The Update will be effective only after restarting the robot. Please take into consideration that the iw.hub may need a couple of minutes to get the update. Wait until the blue lights are turned off, then restart the robot using the blue push button
- Using the Blue Push Button turn off and then on the iw.hub
- After restarting the robot, you need to localize the robot (Please refer to 'How to localize an iw.hub')
© idealworks